The ALG Defense EMR V3X 15 Inch Handguard Review | regular guy guns


Whether you have one AR-pattern rifle or ten, invariably you’ll fall into the habit of just not being able to leave well enough alone. You may not have the skill yet to out-shoot that stock trigger, but you’ll get an itch to take it out and install a Geissele (the big brother to ALG, makers of the EMR V3X Handguard) Single-Stage Precision Flat Bow trigger. That mil-spec stock that wouldn’t look out of place on a GWOT-era recruiting poster? Gone – you’ll acquire something a little more ergonomic such as an Adaptive Tactical EX Performance Stock or a B5 SOPMOD Stock.

Eventually you start replacing major groups of hardware on your AR-15 rifle. Or, you fall into the trap of finding one spare component, and you get bit by “the bug” and have to build out something completely new.

And that’s what happened to me…

One day, in between daily tasks like work, home repairs, dry-fire drills, and shitposting on X, I happened across a spare AR upper receiver from Jacksonville’s own E2 Armory. After doing some further inventory, I had myself a BCM low-pro gas block, a Battle Arms Development BCG, a Ballistic Advantage mid-length 5.56 barrel, and a DSG Arms mid-length gas tube…

Almost enough for a new upper of some sort…let’s see what I can do to round it out…

Going through some field notes and comments on RGG socials, I discovered a few of the fans asking about handguard upgrades that wouldn’t break the bank. More than one user specifically were asking about options from ALG, the “little sister” of the Geissele Automatics family of companies. Founded by Bill Geissele’s wife, Amy Lynn Geissele, ALG aims to keep that Geissele quality, while not maxing out those credit cards.

Well-regarded in our community, ALG produces triggers, handguards, the famous Go Juice lubricant, and even a complete AR-pattern rifle, named “El Jefe”.

Since the vibe I was getting seemed to indicate you all were interested in a solid handguard option, I fired up the old Macbook Air and zapped off a message to ALG, seeking information and perhaps a demo EMR V3X rail.

Amazingly, considering the towering reputation of Geissele & ALG (as compared to my scandalous one!) someone in their customer service department got back to me in a few hours. While by their own admission they weren’t the person who handled requests such as mine, they did forward it up the line to ALG/Geissele’s marketing and communications section.

Within a few days, the head of that department contacted me. After some back-and-forth, a pristine ALG EMR V3X 15 Inch Handguard was on the way from the wilds of North Wales, Pennsylvania down here to the humid tourist trap known as South Florida…

The ALG EMR V3X 15 Inch Handguard, a Ballistic Advantage 5.56mm barrel, and an E2 Armory stripped upper.

The EMR V3X Out Of The Box Experience

A few days after my inquiry to ALG HQ, a nondescript white box showed up on my doorstep. Alerted by the rumbling of a UPS truck and the squawk of solar-powered LTE surveillance camera alarms, I ran outside to secure my prize. Yes, I get all spergy and obsessive over firearms-related packages showing up. You should too.

Anyway, after getting settled, I opened up the box.

Included in the drop was (of course) an ALG EMR V3X handguard, the ALG Barrel Nut, screws, a small Allen key, and some circular shims to help line up the barrel nut properly. Also included for me was the ALG Barrel Nut Wrench, which makes installation of the EMR V3X that much easier. If you purchase directly, it’s $5 via ALG’s website. No fuss, no muss.

And of course, no drop is complete without the requisite amount of stickers and patches. Some Geissele, some ALG, but all fun. Thanks, ALG!

Out of it’s plastic bubble wrap, the first thing I was struck by was the weight. Compared to other rails, the EMR V3X is light. According to the fine folk at ALG, it’s a mere 1.37 pounds. Made of 6061-grade aluminum, the handguard is finished with a Type 3 anodized hardcoat. In black, of course.

Some of the more scientific-minded may wonder as to why the ALG rail uses 6061 aluminum as opposed to 7000 series aluminum. Other than for reasons of cost, 6061 is a little bit lighter, without sacrificing much in the way of durability.

To be fair, if you’re going to handle your AR properly, your handguard isn’t going to take a severe beating that often, so in this case, the EMR V3X being made of 6061 is sufficient, in my humble opinion. Of course, if you want a 7000-series aluminum handguard, step up to a Geissele product.

Aside from the weight, the appearance of the EMR V3X handguard is rather distinct. Not your typical M-LOK chunky handguard, the EMR V3X sports a more rounded profile, with M-LOK attachment points at 2, 4, 6, 8, and 10 o’clock. The 12 o’clock position is occupied by a classic Picatinny rail attachment system, which is pretty much expected of any handguard at this point.

With ridges running the length of the handguard and a tastefully-understated “ALG DEFENSE” engraved near the rear of the item, the EMR-V3X has a look that belies it’s quite impressive price point. Not gonna lie, I was hesitant to even take the complete rifle it ended up being mounted to for a spin – it really looks refreshingly distinct.

A tasteful engraving is the only branding on the EMR V3X 15 Inch Handguard.

As for installation, ALG recommends a professional install by a gunsmith, though they do provide a detailed installation manual which is actually quite easy to follow.

Due to time constraints and the fact that I needed my BA barrel dimpled with two small drilled holes to secure the BCM gas block for safer suppressed shooting, I packed everything up and had my new friends at Defence Solutions Group over in Hallandale Beach assemble the whole menagerie together into one swell new AR upper. With a quick transfer of a Silencerco ASR flash hider to mount my favorite Specwar 762 suppressor, the “new” upper came out beautifully. The EMR Handguard looked positively stunning.

Why Not Geissele?

At this point, you may be asking yourself – why wouldn’t I just get a Geissele handguard? Why go with ALG just to save a few bucks when Geissele is literally in the same building? To be fair, the Geissele handguards are crafted from a more durable grade of aluminum and come in additional finishes. But in my personal opinion, it really comes down to personal preference. According to the fine folk at ALG/Geissele, the main difference aside from metallurgy is that the ALG handguard is a bit more complex to install, which is something I can vouch for. Geissele handguards can often be installed by the end user, whereas the ALG rail requires timing shims and the Barrel Nut tool to install correctly. You pay a little extra for installation convenience and additional durability – and those admirable Geissele finishes.

But, how does the EMR V3X Handguard run? That’s what matters…

The ALG EMR V3X 15 Inch Handguard in the wild.

The EMR V3X Handguard In Real Life

A handguard is a handguard is a handguard, right? Wrong. Not only are there specifics in terms of composition and installation, there are specifics when it comes to ergonomics and handling, which can only be discovered by a trip to the range.

Coincidentally enough, I had an opportunity to visit with the proprietor of Palm Beach Armament, Sean R. or @seanechi as he’s known on the gram. After some administrative details, it was off to his range. Once there, after some shaking the rust off of my tired old carcass, I got down to business and ran the whole ensemble hard.

The first thing that struck me was that the EMR V3X handguard is fantastically light. Other 16 inch uppers I possess are usually quite heavy, as I had a preference for quad rails and thick PSA handguards. The ALG handguard is a smooth and light piece of engineering. Now, a lot of you may think I’m being nitpicky over a few ounces of weight, but the old adage is true, ounces turn into pounds. After awhile you notice.

Coupled with the new BA barrel and a mid-length gas system, shooting a lighter AR with a suppressor attached became more effortless and balanced.

Of course some pro-tips from Sean made it that much easier as well. High-port, people. Trust me on this. Sean knows what he’s doing.

Another notable feature is the heat dissipation. The lighter weight and more plentiful M-LOK “negative space” permits more airflow around the barrel and handguard, getting that pesky heat out of the way. The handguard did heat up a little under sustained courses of fire, but it wasn’t intolerable. To be fair, I’m not really a fairy about getting burned (or flash-frozen…) on occasion, but it’s not something to relish.

My gloves were in my back pocket and I didn’t feel the need to use them, as I would have with a less-ventilated and heavier handguard.

Durability wasn’t a problem either. That anodized finish held up, and it’s looking good, even though the AR-15 it’s mounted to isn’t intended as a safe queen.

The ALG EMR V3X 15 Inch Handguard and a random tire.

The EMR V3X 15 Inch Handguard Is Good To Go

One of the fun things about the AR platform is that it’s easy to do incremental upgrades as you go along. You can start off with one rifle, and end up with a completely different one essentially mounted to the same lower.

While I have one or two ARs in their stock configuration just because, part of the joy of ownership is mixing it up to make that optimal working gun for whatever purpose is on your mind. Competition, defense of self and property, hunting – it’s your call.

As it stands right now, I’m confident and glad to say the EMR V3X 15 inch handguard has found it’s forever home on what I’m now considering my main go-to defensive AR. At a really friendly price point, and ergonomics and performance that are pretty much in the same ballpark as it’s big brothers at Geissele. The ALG EMR V3X 15 inch handguard is a true winner – get one, get two. ALG all the things!

Subscribe To The Regular Guy Podcast

Yes, I’m going to record a new episode soon! A friend suggested a re-tool and relaunch. The new version of the podcast will absolutely not be in stunning color video.

Update: Yes, I’m still gonna do this. Real life, plus I have a face for radio so I think I’m subconsciously stalling. I’m stalling. It’ll be done when it’s done.

Update: Can anyone suggest an efficient method of podcast production? I don’t have the hours to spare to produce it using my existing methods.

Update: If you guys want a podcast, I’ll resume it. Let me know.

Update: Podcasts are irritating to me at the moment. I’ll record one when I feel like it. Give me a reason and I’ll do it sooner 🙂

A big thank you to The Magshack for the continued support.

Source link: by Regular Guy at